In preparation for the reinstatement of the electric anchor windlass I installed a new deck foot switch.
|
Hole Cut Through Deck |
|
New Switch in Place |
|
Switch on Bedding Compound and Finished |
When I had the boat re teaked in Mexico I elected to leave out the foot switch pending the reinstatement. Thus the first task after purchasing the new switch was to cut a hole of 63 mm diameter through the deck with no mistakes.
Robert,
ReplyDeleteIt looks like all will be well in the end.
As to "Mr. X", after following your blog for many years, in cases like this you've been right far more times than you've been wrong.
Best wishes,
Simeon